Видео

Somehow I just bought this exact unit before looking for a video on 2 hose conversion. 😊😂 So this is perfect! Only difference is I bought the 9000 btu one.

Why would they manufacture more popular one hose models when they could just make them two hose for pretty much the same price while being vastly more energy efficient? Well, isn't that a little bit of a mystery... considering the whole industry is gung ho about the climate and environment.... It's almost like they would RATHER be inefficient.... I really would LOVE to understand

Why don't they sell them like this in the first place

Little confused, did I miss the part where the second hose is actually attached? Or is that in another video? So far I just saw the discussion about what you could do, but not how to do it.

Very useful thank you very much friend!

Just finished this upgrade on my old Whynter ARC-10B, and the difference is astounding. It is 120% worth it to pull the covers off the unit and tape over the open space, now this little AC actually performs worth a heck and gets my living room cold! I had been taping cardboard boxes with dryer hose over the intake for years, resulting in a poor man's "dual-hose" setup, but now the hot and cold sides are fully isolated and the performance is just wild. I used 6" insulated ducts (for hydroponics) for intake and exhaust, there is *very* minimal heat leakage from the exhaust hose, and the AC even runs a bit quieter too. I paid ~$250 for this AC in 2014 and it now runs better than ever! Thank you for this video.

I would suggest to 3d print a rectangular adapter to enclose back and side and shrink to a round tube ending in the hose for inlet of exterior air. maybe less restriction ?

SPEAKERS SOUND AMAZING!!! 💯🔥 THE BEST 20WAT SPEAKERS. 💯🔥

Always wondered if u leave the door open with a single hose will it not have neg air pressure cus it can pull from the rest of the house and if U have a dual hose and it bad out say Smokey air fan the smoke leak out once it brings the air inside and leak into the house

Where can I find the adapter that you 3D printed???

I haven't seen the unit yet but all of these I've dealt with have two exhaust ports. One usually has a cap. The two are for convenience of where your window is located left or right of the unit. Now looking at your unit where you put an adapter that shouldn't be an exhaust port. Warm air should only exit from the designed exhaust port. The one you connected to is an intake you don't want that going out doors as you'll be sucking in hot air. I may have misunderstood your explanation at the beginning. Now you're talking about two hoses. Those are both exhaust ports. At least in the dozen or more I've used. An easy explanation is place your hand in front of every vent on your unit. If you feel warm air exiting the vent then it should be ported to exit the area you're trying to to cool. If you feel no warm air at any vent then it's an intake. If you feel cold air coming out of a vent it's obviously a cold air vent

hi sir, would you mind to share the driver of the motherboard please, thank you😊

I made a similar conversion for my mohorhome however my problem is, due to the lack of space, I had to install the original exhaust hose and the new hose to take the air from outside very close together. Do you think that might be a problem? This would mean the condenser is probably going to take some hot air previously exhausted, mixed with the exterior air

But aahh

Will the dehumidifier mode still work with this conversion?

Would it be worth while putting a fan in the funnel shaped inlet from outside and maybe a fan assisting exhaust?or would it tax the system too much

Tried it without insulating the inside. I’m getting better performance out of my portable AC.

Um the bottom is likely the dehumidifier and the top is where it takes air in?

Can u please tell me how to download chipset drivers of h61 mini itx motherboard?

I did this on my Hisense 12000btu and it turned out great, turning on and off like an air conditioner should, and saving energy.

pls share the dimensions of your mod :)

pls share the dimensions of your mod :)

where is the building plan ??

Have you got the stl for the adaptor plate you made?

Great video Dirk! I am considering building a small PC with this board also. I have a pair of old G.SKILL Ripjaws (F3-12800CL9D-8GBRL) - any idea if those will work with this board properly? I saw your recent comment saying that you got it working with a set of 'PC3-12800 PC3-12800U 1.5V CL11 240 Pin 2RX8 Dual Rank Non-ECC Unbuffered' - but I don't know how to figure out which RAM will work, and which won't.

Thank you for the review Dirk.

Can anyone tell me if there are XP drivers for this? The cpu and chipset should word but confirmation would be good. Ram issues fine, I’ll just chuck 2x2gb sticks in it.

Are the fragile without the frame?

Hello. Perfect job ! You seem to be someone perfectionist and pugnacious (as a quality of course). You helped me a lot in my research. Did you insulated the 2 interior parts (hot // cold) of this unit with thin insulation sheet + thermal silicone sealant as well, to prevent any air leaks? Finally, do you think it would be interesting to switch to 2 insulated exhaust ducts for air exchange with the outside? (I am thinking of thermal exchanges but also noise attenuation). Sorry for my bad english :)

I need BIOS Back Up from SZMS B75-MS please 🥹 is broken. I cant find it

This would be great, thanks for your answer

Can anybody tell me I would Plug in the Solarpanel and the DC Plug parallel, which one does the Allpouwer Station prefers Thank for answers in advance

Awesome music, thanks!

Do you still have it?

I hope this guy has taken a lesson in editing after this unabridged shocker

Update 1: Auf der Suche nach Clips hat mir eine Lackiererwerkstatt die Frontabdeckung montiert "fummelig" ist wohl das Fachwort, aber jetzt wieder bombenfest.

Wow hello do you still have it? Actually I just love this thing but I don’t have enough money right now if you don’t mind do you have any one to give me…?

Interesting review. Got one of these with as a first step in 3D printing. Maybe they have changed things since this review. Compared to something you can get now like the Bambu A1-Mini it isn't worth it. Print quality isn't good enough even for basic functional prints. A smallish print of a character took 36 hours! Mine is also really noisy and certainly couldn't be used in an office.

Hi there :) I noticed something strange on my ender. You have a smooth movement from 36:18, but mine goes up slowly and then down. And because of this about 1 cm of filament isn't printed. Any solutions for this? Perhaps someone else has the same problem? I have the latest firmware SWV1.0.6 - THANKS :)

Dirk would you like show us a detailed arduino tutorial based on the stepper motor 28byj 48 because there bunch tutorials about this but when you try the code is just buzz the stepper😢. Thanks for your tutorials

Can you mount 2 sections of rail end-to-end to get a longer run or does that result in an bumps/innacuracies as the carriage crosses the joint between two rails?

Hi! I bought this device just a few months ago and It causes me a lot of troubles. At first It Discharged completely very often without any reason and finally It stopped working. I have to.connect It to the Network to.engage It and then It shows 99% charged so It Will not charged, and after a minute It stops working again and disconnects completely, not even showing then display. It is a nightmare.

This is series of videos on portable AC units is super inspiring and well done on explaining all the details. I really enjoyed watching the conversions to improve the single unit design. It inspired me to undergo a similar conversion and prepare for the summer. It's best to start early, before these units become very expensive and unvailable :) What do you think of the Ometa AC unit 9000BTU, it seems to have similar design with the condesor coil nicelly exposed at the back? I probably would need to open it up to confirm that inside partitions are well separated and sealed, but looks promising. It doesn't seem to have nice removable covers like this Medion unit, but I think that's something I could work around.

What happened to this vid? A big chunk of it is gone, it used to be 10 mins long when I watched this in early 2021. It had explanations on hooking it up to an external power supply to retrieve the data on the hard drives.

Don't ship to UK 😞

I bought 1 yesterday and been now installing it. Looks great.

i have a 12v-25amp plug on my bluetti, could i wire it for that? otherwise it’s 12v 10a cig lighter

The 2-60v input is amazing! it means you can buy some of the used outdoor panels for really cheap that have 30-40v range. Most at this size only go to 24v input

Hello can i ask how does the wifi slot work does it have the two wires that connect to antennas and what its performance comparison to a regular pcie wifi card

I have an MZ-B75-S motherboard, and I can't get Windows 10 to load in the NVMe drive, I get the error "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu. I am able to loads fine on an SSD and old mechanical HDD. I prefer to load the OS in the NVMe drive. What setting should I have the bios in? Thanks in advanced.